5 Port Gigabit POE extender switch! This convenient device offers a hassle-free solution to expand your network connectivity and enhance power and data transmission capabilities. By simply plugging and playing, you can extend the standard 100m data transmission to an impressive 200m using CAT5e/6 UTP cable. No extra power supply or setup is required.
If you’re looking to connect more devices without sacrificing performance, Poe switch extenders are the perfect choice. These clever devices allow you to effortlessly extend Ethernet connections, reaching distant areas of your site or expanding your network’s range. Say goodbye to complex setups and tangled cables – just plug in the Poe extender with splitter ports and enjoy seamless connectivity. Whether you’re a seller, a business owner, or a tech enthusiast, these Poe switch extenders will revolutionize how you connect your PoE devices. Experience a boost in network efficiency and enjoy the advantages of increased watts!
The extender features four output ports, enabling the powering of two separate 802.3af/at/bt devices using a single CAT5 cable from a PoE switch or midspan power injector. This simplifies installation significantly and allows for network expansion without the need for additional cable runs.
Features
- Total 60W Power Supply
- Extends an additional 100 meters
- Automatically detects and protects PoE equipment (PD and PSE) from
being damaged by incorrect installation - Support 10/100/1000M data transmission through RJ45 port
- AI Watchdog Function
- 6KV Lightning & 8KV ESD Protection
Technical Specification
- No. of Channels: 1 PoE IN port and 4 PoE OUT ports
- Pass-Through Data Rates: 10/100/1000 Mbps half/full duplex
- PoE Input(uplink): IEEE802.3af/at/bt; 1/2(+),3/6(-);4/5(+),7/8(-);
MAX 60W - PoE Output(1~4):Â PoE (1~3):10/100/1000Mbps PoE ports (RJ45)
PoE (4):10/100/1000Mbps PoE port (RJ45),
Support bt 60W High Power - Networking Standard IEEE 802.3i 10BASE-T/IEEE 802.3u 100BASE-TX; IEEE 802.3ab 1000BASE-T; IEEE 802.3x Flow Control; IEEE 802.3af/at/bt Power over Ethernet
- Watt Standby Power Consumption:≤1W;
- Full-load Power Consumption:≤60W
- Protection Level Lightning Protection:6KV, Per: IEC61000-4-5 ESD Protection:8KV, Per: IEC61000-4-2 Transmission Mode Store and Forward
- Switching Capacity: 10Gbps
- MAC Address 8K
- Transmission Distance 100m(Max Cascade 2~4 Times)
- Network Cable Type Cat5 or more UTP(≤100 meter)
- Product size(L*W*H) 130*67*26mm
- Weight 0.45kg
- Environmental Conditions:
Operating Ambient Temperature: -30 to 60℃
Operating Humidity: Max 90%, Noncondensing
Storage Temperature: -40 to 70℃
Storage Humidity: Max 95%, Noncondensing
In conclusion,Poe switch extenders offer a cost-effective solution with high powered pass-through. These devices provide a convenient way to expand your network coverage without the need for additional power outlets.
With Poe switch extenders, you can easily connect multiple devices such as IP cameras, access points, and VoIP phones using a single Ethernet cable. This eliminates the hassle of running multiple cables and reduces installation costs.
By leveraging the power over Ethernet technology with a poe injector, these extenders not only transmit data but also deliver power to connected devices. This means you can conveniently power your devices directly from the switch extender with a poe injector, eliminating the need for separate power adapters.
Furthermore, Poe switch extenders ensure reliable and stable network connections by extending the reach of your existing Ethernet infrastructure. They boost signal strength and overcome distance limitations, allowing you to connect devices even in remote locations.
To enhance your network connectivity and streamline your setup process, consider incorporating Poe switch extenders into your infrastructure. With their cost-effectiveness and high-powered pass-through capabilities, these devices provide a practical solution for expanding your network coverage while reducing complexity.
Upgrade your network today with Poe switch extenders and experience seamless connectivity across all corners of your environment.
FAQs
Q: Can I use Poe switch extenders with any standard Ethernet switch?
Yes! Poe switch extenders are compatible with most standard Ethernet switches available in the market. Simply connect the extender between your existing switch and the device you want to extend the connection to.
Q: How far can I extend my network using a Poe switch extender?
The maximum range of a Poe switch extender depends on various factors such as cable quality and environmental conditions. However, in general, you can expect to extend your network up to 100 meters (328 feet) using Cat5e or Cat6 cables.
Q: Can I connect multiple devices to a single Poe switch extender?
Yes, you can connect multiple devices to a single Poe switch extender by utilizing its available Ethernet ports. This allows you to extend the network connection to multiple devices simultaneously.
Q: Are Poe switch extenders suitable for outdoor use?
While some Poe switch extenders are designed for indoor use only, there are models specifically built for outdoor environments. These outdoor-rated extenders are equipped with weatherproof housing and provide reliable connectivity in challenging conditions.
Q: Do Poe switch extenders support PoE+ (802.3at) or only standard PoE (802.3af)?
Many Poe switch extenders support both PoE+ (802.3at) and standard PoE (802.3af), providing flexibility in powering various devices that require different power levels. Make sure to check the specifications of the specific model you choose.
Q: Can I mix different brands of Poe switch extenders with my existing network equipment?
In most cases, mixing different brands of Poe switch extenders with your existing network equipment should not pose any compatibility issues. However, it is always recommended to verify compatibility and consult the manufacturer’s guidelines before making any purchases.
Q: How do I set up a Poe switch extender?
Setting up a Poe switch extender is simple. Just connect one end of an Ethernet cable from your existing network switch to the input port of the extender, and another Ethernet cable from the output port of the extender to the device you want to extend the connection to. The extender will automatically detect and configure itself based on your network settings, requiring minimal user intervention.
Note: Please refer to the manufacturer’s instructions for specific setup procedures tailored to your chosen model, including the use of poe injectors and poe extenders.
